Index  >> Electric & Electronic Materials  >> Water Valve Series  >> CS019-E-180-S-R-HF  
 
     Water Valve Series ¡Ð Design for Drink Water Equipments
 
    CS019-E-180-S-R-HF     Hot Fluid Water Valve With Water Pressure Type
  - Full-Wave Rectified Normally Closed
    Stainless Steel Bush
 
 
CS019-E-180-S-R
 
 Introduction
 
The plastic valve body is made of compound material with glass fiber added, which is specially designed to provide water valves for hot water systems for maker of water dispensers, coffee machines.
 
 Features
 
1.The valve body is made of compound material with glass fiber
   added, and the temperature of the fluid passing through the
   valve body can reach 120¢J
2.The torque strength of the screw thread of the valve body can
   reach 550kgf-cm, which is equal to using a stainless
   steel collar to cover the outer ring of the water inlet of the
   non-compound plastic valve body.
3.The flow rate is large,up to 7 liters/min under the condition of
   1 kg water pressure, and when the 8 kg water pressure is
   applied, the water output can reach 16 liters/min.
4.Input AC voltage rectified by full wave becomes DC voltage, the magnetic force generated by this DC voltage coil will not cause the Plunger to shake, the machine installing this DC coil valve cause no noise during operation.
 
 Uses
 
RO machine, Water dispenser, Ice maker, Coffee machine.
 
 Specification
 
Model  CS019-E-180-S-R-HF
Name  Hot fluid water valve with water pressure type
 - Full-wave rectified normally closed stainless steel bush
Pressure  0.2Kgf/c¢T¡ã8Kgf/c¢T
Dosage  7L/min/(1kgf/c¢T)¡ã16L/min/(8kgf/c¢T)
Fluid Temperature  0¢XC¡ã120¢XC
Voltage  AC110V & 230V
Power  AC7W¡Ó10¢H
Operation Type  Normally Closed
 
 Inner Structures
 
 HOUSING    YOKE
 HOLDER  COIL
 SCREW  DOOR
 STAINLESS STEEL BUSH  VALVE HOLDER
 SHAFT  GASKET
 SHELL  RECTIFIER KIT
 SPRING    PVC WIRE
 
 
unit¡Gmm¡C
 
 
CS019-E-180-S-R-HF DM Download