Index  >> Electric & Electronic Materials  >> Water Valve Series          Water Valve Series － Design for Drink Water Equipments     CS019-E-180-S-R-HF   Hot Fluid Water Valve With Water Pressure Type   - Full-Wave Rectified Normally Closed     Stainless Steel bush   The valve body is made of compound material with glass fiber added, and the temperature of the fluid passing through the valve body can reach 120℃ The torque strength of the screw thread of the valve body can reach 550kgf-cm, which is equal to using a stainless steel collar to cover the outer ring of the water inlet of the non-compound plastic valve body. The flow rate is large,up to 7 liters/min under the condition of 1 kg water pressure, and when the 8 kg water pressure is applied, the water output can reach 16 liters/min. Input AC voltage rectified by full wave becomes DC voltage, the magnetic force generated by this DC voltage coil will not cause the Plunger to shake, the machine installing this DC coil valve cause no noise during operation.       CS019-I-23-2-S-HF   Mini 1/4" Quick Union With Water Pressure Type   - AC and DC Normally Closed Stainless Steel bush     Hot Fluid   The water inlet and outlet are in the same direction, which is more suitable for installation in narrow spaces. Quickly connecting can save machine assembly time. The valve body is made of compound material with glass fiber added, and the temperature of the fluid passing through the valve body can reach 120℃. The flow rate is large, up to 5 liters/min under the condition of 1 kg water pressure, and when the 8 kg water pressure is applied, the water output can reach 14 liters/min.       CS019-I-23-2   Mini 1/4" Quick Union With Water Pressure Type   - AC and DC Normally Closed   The water inlet and outlet are in the same direction, which is more suitable for installation in narrow spaces. Quickly connecting can save machine assembly time. The flow rate is large, up to 5 liters/min under the condition of 1 kg water pressure, and when the 8 kg water pressure is applied, the water output can reach 14 liters/min.       CS019-I-180-3-S-HF   Mini 3/8" Quick Union With Water Pressure Type   - AC and DC Normally Closed Stainless Steel bush     Hot Fluid   Suitable for installation in narrow spaces. Quickly connecting can save machine assembly time. The valve body is made of compound material with glass fiber added, and the temperature of the fluid passing through the valve body can reach 120℃. The flow rate is large, up to 9 liters/min under the condition of 1 kg water pressure, and when the 8 kg water pressure is applied, the water output can reach 20 liters/min.       CS019-I-180-3   Mini 3/8" Quick Union With Water Pressure Type   - AC and DC Normally Closed   Suitable for installation in narrow spaces. Quickly connecting can save machine assembly time. The flow rate is large, up to 9 liters/min under the condition of 1 kg water pressure, and when the 8 kg water pressure is applied, the water output can reach 20 liters/min.       CS019-H-180-S-HF   Hot Fluid Water Valve With Water Pressure Type   - DC Normally Open    Stainless Steel bush   The valve body is made of compound material with glass fiber added, and the temperature of the fluid passing through the valve body can reach 120℃ The torque strength of the screw thread of the valve body can reach 550kgf-cm, which is equal to using a stainless steel collar to cover the outer ring of the water inlet of the non-compound plastic valve body.       CS019-G-R   No water pressure type   - Full-wave Rectified Normally Closed   The material of housing can withstand temp up to 100°C and complies with FDA food grade and NSF certification. Mambrane separated, extend the life cycle of magnetic shaft. Input AC voltage rectified by full wave becomes DC voltage, the magnetic force generated by this DC voltage coil will not cause residual magnetismin in the internal iron core, the machine installing this DC coil valve will not cause leaking water during operation.       CS019-F   Direct acting with water pressure type - AC & DC Normally closed   The housing is made of NSF certified plastic materials. Up to 3.2 liters/min under the condition of 1 kg water pressure, and when the 8 kg water pressure is applied, the water output is smooth and no vibration, the water output can reach 8.5 liters/min. Low temp rise: The metal shell is 80°C after air burning 2 hours at room temp 25°C, and also when there is water in and out of the water path at 25°C, the max temp of the metal shell is only 40°C, In this way, the metal pipe are less likely to have water calcification and reduce the happening of no water flow.       CS019-E-90   Diaphragm with water pressure type   - AC & DC Normally closed   The housing is made of NSF certified plastic materials. Up to 7 liters/min under the condition of 1 kg water pressure, and when the 8 kg water pressure is applied, the water output is smooth and no vibration, the water output can reach 16 liters/min.       CS019-E-180   Diaphragm with water pressure type   - AC & DC Normally closed   The housing is made of NSF certified plastic materials. Up to 7 liters/min under the condition of 1 kg water pressure, and when the 8 kg water pressure is applied, the water output is smooth and no vibration, the water output can reach 16 liters/min.       CS019-E-180-W   Diaphragm with water pressure type   - AC & DC Normally closed    Lead wire   The housing is made of NSF certified plastic materials. Up to 7 liters/min under the condition of 1 kg water pressure, and when the 8 kg water pressure is applied, the water output is smooth and no vibration, the water output can reach 16 liters/min.       CS019-E-180-S-HF   Hot Fluid Water Valve With Water Pressure Type   - DC Normally Closed    Stainless Steel bush   The valve body is made of compound material with glass fiber added, and the temperature of the fluid passing through the valve body can reach 120℃ The torque strength of the screw thread of the valve body can reach 550kgf-cm, which is equal to using a stainless steel collar to cover the outer ring of the water inlet of the non-compound plastic valve body. The flow rate is large,up to 7 liters/min under the condition of 1 kg water pressure, and when the 8 kg water pressure is applied, the water output can reach 16 liters/min.       CS019-D   No water pressure type - DC Normally open   The material of housing can withstand temp up to 100°C and complies with FDA food grade and NSF certification. Components are easy to take apart and maintain. Mambrane separated, extend the life cycle of magnetic shaft.       CS019-C   No water pressure type - DC Normally closed   The material of housing can withstand temp up to 100°C and complies with FDA food grade and NSF certification. Components are easy to take apart and maintain. Mambrane separated, extend the life cycle of magnetic shaft.