Index  >> Electric & Electronic Materials  >> Water Valve Series  >> CS019-F          Water Valve Series － Design for Drink Water Equipments     CS019-F     Direct Acting With Water Pressure Type   - AC & DC Normally Closed      Introduction The plastic housing is made of NSF certified plastic materials, providing water dispenser manufacturers with a water valve that can apply for NSF certification.  Features 1.The housing is made of NSF certified plastic materials. 2.Up to 3.2 liters/min under the condition of 1 kg water    pressure, and when the 8 kg water pressure is applied, the    water output is smooth and no vibration, the water output can    reach 8.5 liters/min. 3.Low temp rise: The metal shell is 80°C after air burning 2    hours at room temp 25°C, and also when there is water in and    out of the water path at 25°C, the max temp of the metal shell    is only 40°C, In this way, the metal pipe are less likely to    have water calcification and reduce the happening of no water    flow.  Uses RO machine, Water dispenser, Ice maker, Coffee machine.  Specification Model  CS019－F Name  Direct acting with water pressure type  - AC and DC Normally closed Pressure  0.3Kgf/c㎡－8Kgf/c㎡ Dosage  3.2L/min/(1kgf/c㎡)∼8.5L/min/(8kgf/c㎡) Fluid Temperature  0°C－100°C Voltage  DC12V & 24V & 36V, AC110V & 230V Power  DC8W±10％, AC6W±10％ Operation Type  Normally Closed  Inner Structures    HOUSING    METAL SHELL  SEALING RING  SCREW  ROUND IRON  BOBBIN  MOVABLE SHAFT  COIL  SPRING  METAL BUSH  SPLIT RING  PLUG  O-RING  PVC WIRE  FIXED SHAFT    WIRE SHEATH     unit：mm。 CS019-F DM Download