Index  >> Aquarium Products  >> Chiller Series  >> CS073A  
 
 
        ”DCS049
        ”DCS051
        ”DCS056
        ”DCS057
        ”DCS073A
        ”DCS073B
        ”DCS073C
     Chiller Series
 
    CS073A     Coldwind Cooler F1  
 
 
 
  Features
 
1. The cooling fan blows the dry air on the surface of water to make the evaporation which reduces the water temperature at the same time, this is water cooling effect.
 
2. Cools 2~3¢J for aquarium size up to 50 l.
 
  Installation
 
Slot the groove into the fish tank and fasten the adjusting screws. Adjust the cooling unit to the desired angle of inclination. Plug the ac adaptor into the outlet,plug the output into dc 12V jack and switch on the toggle switch of the cooling unit.
 
  Technical Specifications
 
Name Coldwind Cooler F1
Model

CS073A

Power supply Switching power supply set attached
Input:see the label on the Adaptor
Output: dc 12V 1000mA
Wattage 5.2W
Noise ”Ų30dB
Measurement”£mm”¤ Width87 x Height162 x Deep92
Weight”£g”¤ 395”£packaged”¤
 
  Caution
 
  • Avoid the main body falling into the water, do not risk the electric components causing a short circuit.
  • Power cord using a drip loop to prevent water from traveling along the cord and coming into the outlet.
  • The product must only be used for cooling aquaria.
 
  Limited Warranty
 
  • Under normal use and service, all appliances carry 12 months warranty from the date of purchase on parts and labor against manufacturing defects. Please return the unit if deemed defective to your local dealer for repair or replacement.
  • The warranty is limited to this appliance only, Not responsible for consequential loss or damage.
 

 
CS073A DIRECTIONS Download