|
CS073C |
Coldwind Cooler F4 |
|
|
|
|
1. |
The cooling fan blows the dry air on the surface of water to make the evaporation which reduces the water temperature at the same time, this is water cooling effect. |
|
2. |
Cools 2~3¢J for aquarium size up to 200 l. |
Slot the groove into the fish tank and fasten the
adjusting screws. Adjust the cooling unit to the
desired angle of inclination. Plug the ac adaptor
into the outlet,plug the output into dc 12V jack and
switch on the toggle switch of the cooling unit. |
|
|
Name |
Coldwind Cooler F4 |
Model |
CS073C |
Power
supply |
Switching
power supply set attached
Input:see the label on the Adaptor
Output: dc 12V 1000mA
|
Wattage |
10.5W |
Noise |
”Ų30dB |
Measurement”£mm”¤ |
Width400
x Height125 x Deep65 |
Weight”£g”¤ |
1006”£packaged”¤ |
- Avoid the main body falling into the water, do not risk the electric components causing a short circuit.
- Power cord using a drip loop to prevent water from traveling along the cord and coming into the outlet.
- The product must only be used for cooling aquaria.
|
- Under normal use and service, all appliances carry 12 months warranty from the date of purchase on parts and labor against manufacturing defects. Please return the unit if deemed defective to your local dealer for repair or replacement.
- The warranty is limited to this appliance only, Not responsible for consequential loss or damage.
|
|
|
|
|