|
CS060 Series |
Micom Temp Controller |
|
|
|
|
- Alarm controlled by Micom chip, yet it won't emit any sound while resetting the temperature or initial lower temperature.
- It will emit a sound of alarm and cut the load of heater, if there is ¡Ó3¢Jerror happened between actually temperature and setting temperature.
- It will emit a sound of alarm and cut the load of heater if the actually temperature is over 35¢J or under 20¢J.
- when the sensor cable is cut or short-circuited, it will emit a sound of alarm and cut the load of heate.
- Failure status is easy to tell by flashing symbols and emitting sounds.
- Max Wattage load 1200W.
|
|
CS062A
Series |
Micom Temp Controller |
|
|
|
|
- Controlled by Micom single chip, It will emit a sound and cut the load of heater when the actually temperature over 35¢J or keep heating under 20¢J by flash symbols.
- Once the sensor wire is cut or short-circuited, it will emit a sound and cut the load of heater.
- Failure status is easy to tell by flashing symbols and emitting sounds.
|
|
CS063C
Series |
Micom Temp Controller |
|
|
|
|
- Alarm controlled by Micom chip, yet it won't emit any sound while resetting the temperature or initial lower temperature.
- It will emit a sound of alarm and cut the load of heater, if there is ¡Ó3¢Jerror happened between actually temperature and setting temperature.
- It will emit a sound of alarm and cut the load of heater if the actually temperature is over 35¢J or under 20¢J.
- when the sensor cable is cut or short-circuited, it will emit a sound of alarm and cut the load of heater.
- Failure status is easy to tell by flashing symbols and emitting sounds.
- Max Wattage load 1200W.
|
|