|
CS063C Series |
Micom Temp Controller |
|
|
|
|
1.Alarm controlled by Micom chip, it won't emit any sound while resetting
the temperature or initial lower temperature.
2.It will emit a sound of alarm if there is ”Ó3¢Jerror happened between actually
temperature and setting temperature.
3.It will emit a sound of alarm if the actually temperature is over 35¢J or under
20¢J.
4.when the sensor cable is cut or short-circuited, it will emit a sound of alarm
and cut the load of heater.
5.Failure status is easy to tell by flashing symbols and emitting sounds.
6.Max Wattage load 1200W. |
Model |
CS063C |
Operating temperature range |
20¢J”ć34¢J |
Voltage Frequency |
See the back of main body |
Temperature display
|
9¢J”ć34.9¢J |
Wattage
|
Max load 1200W
|
Precision |
”Ó1¢J |
Usage |
Aquarium product ,control heating water |
Size ”£mm”¤ |
Body”GWidth 70 x Height 162 x Deep 37
Power cord wire”G1100
Load extension wire”G430
Sensor wire”G1000 |
Weight ”£g”¤ |
Body”G360
”£including power cord wire ,sensor wire”¤ |
Accessory |
Hanger 1pcs ,double side tape 2pcs |
|
|
|
|