Index  >> Electric & Electronic Materials  >> Micom Liquid Feeder Series  >> CS072B-1.2               ．CS072A-1         ．CS072A-2         ．CS072A-3         ．CS072A-4         ．CS072B-1         ．CS072B-2         ．CS077-1         ．CS077-2      Micom Liquid Feeder Series     CS072B-1.2     Micom Liquid Feeder － Intelligent Dosing Time & Dosage Type     CS072B-1 Switching power supply set attached   CS072B-2 DC jack connected wire set attached   Feature 1.Micro-computer single-chip controlled, simply operate. 2.Unique mirco-adjusting device on dosage. 3.Intelligent dosing time. 24 times/day ∼ 1 time/9 day. 4.1 ml to 99 ml dosage as set. 5.Bright LED display, easily visible. Technical Specifications Model CS072B-1 Power supply Switching power supply set attached Input: Look at a mark label Output: dc 12V 1000mA Full Power consumption while pump running 2.2W Dosing time 24 times/day ∼ 1 time/9 days Dosage 1ml ∼ 99ml Dosage accuracy <±3％ Measurement﹝mm﹞ Width69 x Height96 x Deep88 Weight﹝g﹞ 450﹝packaged﹞ Accessory Rubber hose 3m, Switching power supply 1 set Model CS072B-2 Power supply DC jack connected wire set attached Weight﹝g﹞ 340﹝packaged﹞ Accessory Rubber hose 3m, DC jack connected wire 1 set Attention Above data is only approximate, it wouldn't be advised if the specification being changed. A Method Of Motor Replacement     1.Remove the dosing    pump cover by    releasing the latch. 2.Pull up the connector. 3.Push left and right    hooks outward and then    up the dosing pump ,fix    the new dosing pump in    reverse order. CS072B-1.2 DIRECTIONS Download CS072B-1.2 DM Download     ACCESSORIES   ●CS074-1 Adaptor   Input：look at a mark label. Output：dc 12V 1000mA.   ●CS074-2 Hanger for fitting rubber hoses     ●CS074-3 Dosing pump   A method of dosing pump replacement